Chromatographiebedarf

Kapillare und Kapillarschneider in verschiedenen Ausführungen Materialien und für verschiedene Zwecke

Bei größerer Abnahmemenge Sonderpreise erfragen (ab 20 Meter)

Hinweis: bei Maßangabe Feet (z.B 5´entsprechen etwa 1,5 Meter)

PEEKTM Tubing
- 1/16", 1/8" and 1.8mm ODs Available / Biocompatible, Inert and Easily Cut / Great for High Pressure Applications

 Upchurch PEEK Kapillare
Upchurch Scientific® PEEK (polyetheretherketone) polymer tubing is biocompatible, chemically inert to most solvents, and can be used to replace stainless steel tubing in most liquid analytical systems. Unlike stainless steel and titanium tubing, PEEK tubing is flexible and can be easily cut to desired lengths. PEEK tubing can be used with stainless steel or polymer fittings.
The benefits of PEEK polymer tubing include a high pressure rating (up to 7,000 psi in most cases) and a high temperature rating (maximum continuous use temperature of 100°C). Additionally, PEEK tubing has a very smooth internal surface, which causes less turbulance than similar sized metal tubing. Turbulence can cause remixing of separated sample bands and dilution of bands by the mobile phase. Of all our polymer tubing materials, PEEK is the least permeable to gas.
Upchurch Scientific PEEK polymer tubing is extruded to the following OD/ID tolerances: 1/16" OD tubing, ±.001 " for both; 1/8" OD tubing, ±.003" for both; 1.8mm OD tubing, ±.002" and ±.001 ", respectively. The tubing also features excellent concentricity, with a Total Indicator Runout (TIR) of.003" or less on our 1/16" OD tubing. In addition, our 1/16" OD tubing is color-coded so different IDs are easily identified. Color permanence is ensured with the proprietary process we use in our tubing extrusion.
PEEK tubing offers outstanding chemical compatibility, with very few solvents interacting with the polymer. Exceptions include DMSO, methylene chloride, and THF, which can cause mild swelling. Concentrated nitric and sulfuric acids will degrade PEEK, although our studies show it can safely withstand 20 - 30% nitric acid, at room temperature, for brief system cleaning (be sure to remove your column prior to cleaning!).Our 5' length tubing is rough cut to approximately 5'1 ". A trim cut should be performed before use, especially for smaller ID tubing. PEEK tubing can be cut easily with a razor blade. However for a better cut, try our Tubing Cutters

 

DIFFERENTIAL PRESSURE PER 5-FOOT LENGHT
Which ID is best for your application? Refer to flow rates (using water as the solvent) and tubing IDs below and the corresponding differential pressure per 5-foot length.
Tubing ID
Flow rate .0025" .005" .007" .010" .020" .030" .062"
0.1mL/min 923 (64) 85 (4.0) 15 (1.0) 4 (0.3) 0 (0) 0 (0) 0 (0)
1.0mL/min NR (1) 577 (40) 150 (10) 36 (2.5) 2 (0.1) 0 (0) 0 (0)
2.0ml/min NR (1) 1,154 (80) 300 (21) 72 (5.0) 5 (0.3) 1 (0.1) 0 (0)
10.0mL/min NR (1) 5,770 (398) 1,520 (103)  361 (25) 23 (1.6) 5 (0.3) 0 (0)
25.0mL/min NR (1) NR (1) 3,755 (259) 902 (62) 45 (3.9) 11 (0.8) 0 (0)
(1) Not Recommended - Exceeds the pressure rating of the tubing.

 

Artikelnummer Tubing ID Color Max. Pressure Preis in € / VE (1,5 m)

PEEK TUBING, 1/16" OD
1560 .0025" (65µm) ID Natural 7,000 psi (483 bar) (1) 26,16
1561 .004" (100µm) ID Black 7,000 psi (483 bar) (1) 26,16
1535 .005" (125µm) ID Red 7,000 psi (483 bar) (1) 26,16
1562 .006" (150µm) ID Purple 7,000 psi (483 bar) (1) 26,16
1536 .007" (175µm) ID Yellow 7,000 psi (483 bar) (1) 18,33
1531 .010" (0.25mm) ID Natural 7,000 psi (483 bar) (1) 18,33
1531 B .010" (0.25mm) ID Blue 7,000 psi (483 bar) (1) 18,33
1565 .015" (0.40mm) ID Gray 7,000 psi (483 bar) (1) 18,33
1532 .020" (0.50mm) ID Orange 7,000 psi (483 bar) (1) 18,33
1533 .030" (0.75mm) ID Green 7,000 psi (483 bar) (1) 18,33
1538 .040" (1.00mm) ID Natural 5,000 psi (345 bar) (1) 18,33
1537 .055" (1.40mm) ID Natural 500 psi (34 bar) (1) 26,16
PEEK TUBING, 1/8" OD 
1534 .062" (1.60mm) ID Natural 4,000 psi (276 bar) (1) 37,90
1544 .080" (2.00mm) ID Natural 3,000 psi (207 bar) (1) 37,90
PEEK TUBING, 1.8mm OD 
1545 .010" (0.25mm) ID Natural 7,000 psi (483 bar) (1) 31,31
1546 .020" (0.50mm) ID Natural 7,000 psi (483 bar) (1) 31,31
1547 .030" (0.75mm) ID Natural 7,000 psi (483 bar) (1) 31,31
1540 .042" (1.05mm) ID Natural 5,000 psi (345 bar) (1) 31,31
1539 .055" (1.40mm) ID Natural 500 psi (34 bar) (1) 31,31
(1) Testing conducted with water at room temperature. Use of some chemicals and higher temperatures may reduce the pressure limit Please contact us for more information Please Note: Using a heat gun or overheating can weaken year tubing.

 

CAPILLARY PEEKTM TUBING
360{nn, 510um and 1/32" ODs Available IDs as .Small as 50µm (.002")

PEEK Kapillare

 FUSED SILICA TUBING
Capillary PEEK tubing offers all the benefits of larger sized PEEK tubing, while serving as an excellent alternative to more traditional fused silica and stainless steel capillary tubing (see Application Note to the right). This specialized tubing is manufactured in three sizes - 360µm (.0145"), 510µm (.020") and 1/32" (785µm) ODs. These sizes of tubing can be coupled to many of the products in our Micro Flow chapter and are recommended for the micro- and nano-scale valves in the High Pressure Valves Chapter .
Tolerances of the Upchurch Scientific' capillary 360µm and 1/32" OD PEEK tubing are ±.0005" for both OD and ID. Tolerances for 510µm ODtubing is ±.001" for both OD and ID.		 As a service to our customers, we offer cut fused silica tubing in convenient 2m lengths. Choose from 20, 50, 75, 100 and 150 micron ID sizes, all with 360µm OD. These products are comprised of synthetic fused silica with a
polyimide coating. This tubing is manufactured by Polymicro Technologies. They rate this tubing to 350°C. The OD tolerance for all 360µm OD fused silica tubing is ±10µm. The ID tolerances are: ±2µm for the 20µm ID tubing; ±3µm for the 50µm and 75pm ID tubing; and ±4µm for the 100µm and 150µm ID tubing. For other sizes or lengths of fused silica tubing, please contact Polymicro Technologies directly.

Mindestabnahmemenge beachten !

CAPILLARY PEEK TUBING, 360µm (.0145") OD (1)
Artikelnummer Tubing ID Color Max. Pressure Preis in € / VE (1,5 m)
1570 50µm (.002") ID x 5' Natural 2,000 psi (138 bar)" 31,31
1573 75µm (.003") ID x 5'  Black 2,000 psi (138 bar)" 31,31
1571 100µm (.004") ID x 5' Red 2,000 psi (138 bar)" 31,31
1572 150µm (.006") ID x 5' Yellow 2,000 psi (138 bar)" 31,31
CAPILLARY PEEK TUBING, 510µm (.020") OD
1543 65µm (.0025") ID x 5'    Natural 2,000 psi (138 bar)" 31,31
1541 125µm (.005") ID x 5'    Natural 2,000 psi (138 bar)" 31,31
1542 255µm (.010") ID x 5'   Natural 2,000 psi (138 bar)" 31,31
CAPILLARY PEEK TUBING, 1/31" OD
1579 65µm (.0025") ID x 5' Natural 5,000 psi (345 bar)" 31,31
1578 90µm (.0035") ID x 5' Black 5,000 psi (345 bar)" 31,31
1576 125µm (.005") ID x 5'     Red   5,000 psi (345 bar)" 31,31
1577 175µm (.007") ID x 5'   Yellow  5,000 psi (345 bar)" 31,31
1575 200µm (.008") ID x 5' Natural 5,000 psi (345 bar)" 31,31
1580 230µm (.009") ID x 5' Gray    5,000 psi (345 bar)" 31,31
1581 .25mm (.010") ID x 5'  Blue  5,000 psi (345 bar)** 31,31
1568 .40mm (.015") ID x 5' Natural 5,000 psi (345 bar)" 31,31
1569 .50mm (.020") ID x 5' Orange 3,000 psi (207 bar)" 31,31

Abnahmemenge beachten !

FUSED SILICIA TUBING, 360µm OD
Artikelnummer Tubing ID Preis in € / 2 meter
FS-120 20µm (.0008") ID x 2m 64,27
FS-150 50µm (.002") ID x 2m 64,27
FS-175 75µm (.003") ID x 2m 64,27
FS-110 100µm (.004") ID x 2m 64,27
FS-115 150µm (.006") ID x 2m 64,27
(1) The OD size of the fused silica and 360pm PEEK tubing on this page is actually 363µm and 368µm, respectively. Industry convention refers to this tubing by a nominal size of 360µm. (2) Testing conducted with water at room temperature, Use of some chemicals and higher temperatures may reduce the pressure limit Please contact us for more information Please Note: using a heat gun or overheating can weaken your tubing,

 

PEEKsilTM TUBING
PEEKsiI is fused silica tubing sheathed in PEEK™ polymer, with an effective outer diameter of 1/32" or 1/16". The PEEK sheathing is mechanically strong and has ideal characteristics for sealing with metal or polymer fittings. PEEKsiI can be used as a direct replacement for conventional stainless steel or PEEK tubing in many analytical systems.
Like traditional fused silica tubing, PEEKsiI has excellent chemical compatibility and extremely low absorption characteristics, especially when compared to stainless steel. The PEEK sheath/fused silica combination makes this tubing capable of withstanding up to 10,000 psi (690 bar).
PEEKsiI is manufactured by SGE International Pty, Ltd. Their stated OD tolerance for 1/32" and 1/16" OD tubing is ±20µm and ±30µm, respectively. The ID tolerances are: ±1 µm for the 25µm; ±3µm for 50 - 100µm; and ±5µm for the 150µm - 300µm IDs. Please contact us about the availability of additional ID sizes and lengths.
Please Note: do not cut this tubing. It should be used at its precut lengths because of permanent damage caused by conventional cutters.

 

Artikelnummer Tubing ID Color Max.Pressure Menge Preis in € /Pckg.
PEEKsil TUBING, 1/32" OD
3255 25µm (.001") ID x 5cm Orange 10,000 psi (690 bar) (1) 2-pk 23,79
32510 25µm (.001") ID x 10cm Orange 10,000 psi (690 bar) (1) 2-pk 25,96
32515  25µm(.001") ID x 15cm Orange 10,000 psi (690 bar) (1) 2-pk 32,03
32520  25µm (.001") ID x 20cm Orange 10,000 psi (690 bar) (1) 2-pk 42,33
32550  25µm (.001") ID x 50cm Orange 10,000 psi (690 bar) (1) 2-pk 67,05
3505 50µm (.002") ID x 5cm Natural 10,000 psi (690 bar) (1) 2-pk 23,79
35010   50µm (.002") ID x 10cm Natural 10,000 psi (690 bar) (1) 2-pk 25,96
35015   50µm (.002") ID x 15cm Natural 10,000 psi (690 bar) (1) 2-pk 32,03
35020   50µm (.002") ID x 20cm Natural 10,000 psi (690 bar) (1) 2-pk 42,33
35050   50µm (.002") ID x 50Cm Natural 10,000 psi (690 bar) (1) 2-pk 67,05
3755 75µm (.003") ID x 5cm Black 10,000 psi (690 bar) (1) 2-pk 23,79
37510    75µm (.003") ID x10cm Black 10,000 psi (690 bar) (1) 2-pk 25,96
37515   75µm (.003") ID x 15cm Black 10,000 psi (690 bar) (1) 2-pk 32,03
37520   75µm (.003") ID x 20cm Black 10,000 psi (690 bar) (1) 2-pk 42,33
37550   75µm (.003") ID x 50cm Black 10,000 psi (690 bar) (1) 2-pk 67,05
31005   100µm (.004") ID x 5cm Red 10,000 psi (690 bar) (1) 2-pk 23,79
310010    100µm (.004") ID x10cm Red 10,000 psi (690 bar) (1) 2-pk 25,96
310015      100µm(.004")IDx15cm Red 10,000 psi (690 bar) (1) 2-pk 32,03
310020     100µm(.004")IDx20cm  Red 10,000 psi (690 bar) (1) 2-pk 42,33
310050      100µm(.004")IDx50cm Red 10,000 psi (690 bar) (1) 2-pk 67,05
31505   150µm (.006") ID x 5cm Purple 10,000 psi (690 bar) (1) 2-pk 23,79
315010      150µm(.006")IDx10cm Purple 10,000 psi (690 bar) (1) 2-pk 25,96
315015      150µm(.006")IDx15cm Purple 10,000 psi (690 bar) (1) 2-pk 32,03
315020    150µm (.006") ID x20cm Purple 10,000 psi (690 bar) (1) 2-pk 42,33
315050    150µm(.006") ID x50cm Purple 10,000 psi (690 bar) (1) 2-pk 67,05
PEEKsil TUBING, 1/16" OD
6255 25µm (.001") ID x 5cm Orange 10,000 psi (690 bar) (1) 5-pk 54,59
62510 25µm (.001") ID x 10cm Orange 10,000 psi (690 bar) (1) 5-pk 67,05
62515 25µm (.001") ID x 15cm Orange 10,000 psi (690 bar) (1) 5-pk 79,52
62520 25µm (.001") ID x 20cm Orange 10,000 psi (690 bar) (1) 5-pk 94,04
62550 25µm (.001") ID x 50cm Orange 10,000 psi (690 bar) (1) 2-pk 67,05
6505 50µm (.002") ID x 5cm Natural 10,000 psi (690 bar) (1) 5-pk 54,59
65010 50µm (.002") ID x 10cm Natural 10,000 psi (690 bar) (1) 5-pk 67,05
65015 50µm (.002") ID x 15cm Natural 10,000 psi (690 bar) (1) 5-pk 79,52
65020 50µm (.002") ID x 20cm Natural 10,000 psi (690 bar) (1) 5-pk 94,04
65050 50µm (.002") ID x 50cm Natural 10,000 psi (690 bar) (1) 2-pk 67,05
6755 75µm (.003") ID x 5cm Black 10,000 psi (690 bar) (1) 5-pk 54,59
67510 75µm (.003") ID x 10cm Black 10,000 psi (690 bar) (1) 5-pk 67,05
67515 75µm (.003") ID x 15cm Black 10,000 psi (690 bar) (1) 5-pk 79,52
67520 75µm (.003") ID x 20cm Black 10,000 psi (690 bar) (1) 5-pk 94,02
67550 75µm (.003") ID x 50cm Black 10,000 psi (690 bar) (1) 2-pk 67,05
61005 100µm (.004") ID x 5cm Red 10,000 psi (690 bar) (1) 5-pk 54,59
610010 100µm(.004")IDx10cm Red 10,000 psi (690 bar) (1) 5-pk 67,05
610015 100µm(.004")IDx15cm Red 10,000 psi (690 bar) (1) 5-pk 79,52
610020 100µm (.004")IDx20cm Red 10,000 psi (690 bar) (1) 5-pk 94,02
610050 100µm (.004") ID x50cm Red 10,000 psi (690 bar) (1) 2-pk 67,05
61505 150µm (.006") ID x5cm Purple 10,000 psi (690 bar) (1) 5-pk 54,59
615010 150µm (.006")IDx10cm Purple 10,000 psi (690 bar) (1) 5-pk 67,05
615015 150µm (.006") IDx15cm Purple 10,000 psi (690 bar) (1) 5-pk 79,52
615020 150µm (.006") ID x20cm Purple 10,000 psi (690 bar) (1) 5-pk 94,04
615050 150µm (.006") ID x50cm Purple 10,000 psi (690 bar) (1) 2-pk 67,05
61755 175µm (.007") ID x 5cm Yellow 10,000 psi (690 bar) (1) 5-pk 54,59
617510 175µm (.007") IDx10cm Yellow 10,000 psi (690 bar) (1) 5-pk 67,05
617515 175µm (.007") ID x15cm Yellow 10,000 psi (690 bar) (1) 5-pk 79,52
617520 175µm (.007") ID x20cm Yellow 10,000 psi (690 bar) (1) 5-pk 94,04
617550 175µm (.007") ID x50cm Yellow 10,000 psi (690 bar) (1) 2-pk 67,05
62005 200µm (.008") ID x 5cm Blue 10,000 psi (690 bar) (1) 5-pk 54,59
620010 200µm (.008") ID x10cm Blue 10,000 psi (690 bar) (1) 5-pk 67,05
620015  200µm (.008") IDx15cm Blue 10,000 psi (690 bar) (1) 5-pk 79,52
620020 200µm (.008") ID x20cm Blue 10,000 psi (690 bar) (1) 5-pk 94,04
620050 200µm (.008") ID x50cm Blue 10,000 psi (690 bar) (1) 2-pk 67,05
63005 300µm (.012") ID x 5cm Gray 10,000 psi (690 bar) (1) 5-pk 54,59
630010 300µm (.012") ID x 10an Gray 10,000 psi (690 bar) (1) 5-pk 67,05
630015 300µm (.012") ID x15cm Gray 10,000 psi (690 bar) (1) 5-pk 79,52
630020 300µm (.012") IDx20cm Gray 10,000 psi (690 bar) (1) 5-pk 94,04
630050 300µm (.012") ID x50cm Gray 10,000 psi (690 bar) (1) 2-pk 67,05
(1) Pressure rating determined by SCE International Pty., Ltd., the manufacturer of this tubing.

 

SPIRAL-LINK™ TUBING

The coils of our 1/16" OD x.010" ID Spiral-Link tubing expand and contract, allowing you to easily move your system components or even make equipment repairs whenever needed, without the hassle of breaking connections.
Upchurch Scientific® SpiralLink tubing is made of PEEK polymer, a biocompatible, chemically inert material. Spiral-Links come in six different lengths. Color permanence is ensured through our proprietary extrusion process.
Each Spiral-Link ships with two F287 SeaITight™ Fittings.

 ULTEM® TUBING

Transparent / Withstands Repeated Sterilization / High Durability

Upchurch Scientific has the capability to extrude Ultem (polyetherimide) tubing. Ultem tubing offers high burst strength, high heat resistance and excellent chemical resistance against many solvents, lipids, detergents and disinfectants. In addition, tubing made from Ultem is transparent, allowing flow to be monitored.This polymer withstands the degradation effects of various sterilization methods, such as repeated autoclaving, gamma radiation, EtO gas, and dry heat. Ultem meets IS010993, FDA and USP Class VI criteria. Please inquire about the availability of Ultem tubing.
RADEL® R TUBING

- Withstands up to 12,500 psi (862 bar) / Transparent and Autoclavable / 1/16" and 1/8" Obs Available
Radial R (polyphenylsulfone) is a mechanically strong and chemically resistant material, much like PEEK. Radel R is frequently used in medical applications where repeated autoclave sterilization is performed (tests show product stability after 1,000 cycles). Racial R tubing is also transparent, allowing technicians to visually monitor flow through their instrument. Readily wetted surfaces help keep air bubbles from accumulating on inner surfaces.
This tubing is available in 1/16" and 1/8" ODs, with OD/ID tolerances of ±.001 " and ±.003", respectively. This polymer's high heat deflection value allows it to be used at a maximum operating temperature of 100°C without losing mechanical strength.

 

SPIRAL-LINK TUBING (1) .010" (.25mm) ID XX 1/16" OD BLUE
Artikelnummer Lenght of tubing prior to coiling Max. coil span Volume Preis in €
17201 10cm N/A 5µL 23,18
17202 20cm 0.5" (1.3cm 10µL 23,18
17204 40cm 2.4" (6.1cm) 20µL 27,91
17205 50cm 3.0" (7.6cm) 25µL 27,91
17210 100cm 7.0" (17.8cm) 51µL 36,15
17220 200cm 13.0" (33.0cm) 101µL 36,15
RADEL R TUBING, 1/16" OD 

Mindestabnahmemenge beachten !
Artikelnummer Tubing ID Color Max. Pressure Preis in € / VE (1,5 m)
1210 .010" (0.25mm) ID x 5' Natural 12,500 psi (862 bar) (2) 31,31
1220 .020" (0.50mm) ID x 5' Natural 7,500 psi (518 bar) (2) 31,31
1230 .030" (0.75mm) ID x 5' Natural 5,500 psi (379 bar) (2) 31,31
RADEL R TUBING, 1/8" OD
1235 .062" (1.55mm) ID x 5' Natural 4,500 psi (310 bar) (2) 45,42
(1) Each Spiral-[ ink includes (2) F-287 SeaITlgh[ Fittings
(2) Testing conducted with water at room temperature. Use of some chemicals and at higher temperatures may reduce the pressure lent Please contact us for more information

 

TEFZEL® (ETFE) TUBING
- Excellent Chemical Resistance /
Holds Pressure up to 4,000 psi (276 bar) / 1/16", 1/8", and 1/4" ODs Available

 Tefzel Kapillare HALAR® TUBING
- Excellent Chemical Resistance / Good for Radiation Sterilization / 1/16" and 1/8" ODs Available
Upchurch Scientific® ETFE (ethyl ene-tetrafluoroethylene) tubing is an excellent fluoropolymer product offering several benefits over Teflon®. For instance, the .010" ID x 1/16" OD ETFE tubing can withstand aqueous pressures to 4,000 psi (276 bar), and up to 1,200 psi (83 bar) with some amines and inorganic acids. ETFE tubing is also somewhat more rigid than Teflon tubing and thus exhibits a greater resistance to inner diameter collapse. The recommended maximum operating temperature for ETFE tubing is 80°C. The OD/ID tolerances of our ETFE tubing are: As another member of the fluoropolymer family, Halar ECTFE (ethylenechlorotrifluoroethylene) offers excellent chemical resistance coupled with mechanical strength superior to Teflon. Tubing made of Halar also outperforms Teflon in ability to withstand radiation, making it attractive for medical applications. The OD/ID tolerances of Upchurch Scientific Halar tubing are both ±.001" for the 1/16" OD tubing and ±.003" for the 1/8" OD tubing. Pressure ratings are presented with the product listings on this page. The recommended maximum operating temperature for Halar tubing is 50°C.
Tubing OD Tubing ID OD/ID Tolerances
1/16" OD .010", .020", .030" ±.001"
1/16" OD .040" ±.002"
1/8" OD All ±.003"
1/4" OD All ±.004"

Mindestabnahmemenge beachten !

         
Artikelnummer Tubing ID Color Max. Pressure Preis in € / VE (1,5 m)

TEFZEL (ETFE) TUBING, 1/16" OD
1529 .010" (0.25mm) ID x 5' Natural  4,000 psi (276 bar) (1) 12,05
1516 .020" (0.50mm) ID x 5' Natural 3,000 psi (207 bar) (1) 12,05
1528 .030" (0.75mm) ID x 5' Natural 2,000 psi (138 bar) (1) 12,05
1517 .040" (1.00mm) ID x 5' Natural 500 psi (34 bar) (1) 12,05
TEFZEL (ETFE) TUBING, 1/8" OD
1515 .062" (1.55mm) ID x 5' Black 1,000 psi (69 bar) (1) 18,33
1530  .062" (1.55mm) ID x 5' Natural 1,000 psi (69 bar) (1) 18,33
1648 .093" (2.40mm) ID x 5' Natural 500 psi (34 bar) (1) 18,33
TEFZEL (EFTE) TUBING, 1/4" OD
1647 .188" (4.80mm) ID x 10' Natural 250 psi (17 bar) (1) 52,63 (VE = 3 m)
HALAR TUBING, 1/16" OD
4010 .010" (0.25mm) ID x 5' Natural 6,000 psi (414 bar) (1) 12,05
4020 .020" (0.50mm) ID x 5' Natural 3,500 psi (241 bar) (1) 12,05
4030 .030" (0.75mm) ID x 5' Natural 3,000 psi (207 bar) (1) 12,05
HALAR TUBING, 1/8" OD
4000 .062" (1.55mm) ID x 5' Natural 2,500 psi (172 bar) (1) 18,33
(1) Testing conducted with water at room temperature. Use of some chemicals and at higher IemperaNma may reduce the pressure limit. Please contact us for more information.

 

TEFLON® FEP TUBING
- Great for Moderate-to-Low Pressure Applications / 1/32",1/16",1/8", 3/16", 1/4" and 5/16" ODs Available / 1mm, 2mm, 3mm and 4mm ODs Available
Teflon Kapillare With virtually identical chemical resistance to PFA at a lower price, Upchurch Scientific® Teflon FEP tubing is great for general, low pressure applications. Compared to PTFE, Teflon FEP (fluorinated ethylene propylene) tubing is held to tighter tolerances and has lower gas permeability.
Much of our Teflon FEP Tubing is transparent, making it possible to watch fluid flow. Using different colored tubing can help identify transfer lines in multisolvent systems. Color coding also allows easy identification of the tubing thru-hole size. Black FEP tubing is available for light-sensitive applications (such as enzymatic and chemi-luminescent reactions) and entering/exiting flow cells.
FEP 1/16" OD tubing holds from 1,000 psi (69 bar) to 4,000 psi (276 bar) depending on the ID. Our 1/8" and 3/16" OD tubing hold to 500 psi (34 bar), while our 1/4" and 5/16" OD tubing hold to 250 psi (17 bar). All of our metric-sized tubing is rated to 500 psi (34 bar). The recommended maximum operating temperature for Teflon FEP is 50°C.

Mindestabnahmemenge beachten !

TEFLON FEP TUBING, 1/32" OD
Artikelnummer Tubing ID Color Max. Pressure Preis in € / VE (1,5 m)
1683 75µm (.003") ID x 5' Natural 4,000 psi (276 bar) (1) 25,24
1684 100µm (.004") ID x 5' Black 3,000 psi (207 bar) (1) 25,24
1685 125µm (.005") ID x 5' Red 3,000 psi (207 bar) (1) 25,24
1686 150µm (.006") ID x 5' Violet 3,000 psi (207 bar) (1) 25,24
1687 175µm (.007") ID x 5' Yellow 3,000 psi (207 bar) (1) 25,24
1688 200µm (.008") ID x 5' Natural 2,500 psi (172 bar) (1) 25,24
1689 230µm (.009") ID x 5' Blue 2,500 psi (172 bar) (1) 25,24
1692 405µm (0.16") ID x 5' Natural 1,500 psi (104 bar) (1) 25,24
(1) Testing conducted with water at room temperature. Use of some chemicals and at higher temperatures may reduce the pressure limit. Please contact us for more information

 

The OD/ID tolerances of our FEP tubing are:
  Tolerances
Tubing Size OD ID
1/32" OD ±.0005" ±.0005"
1/16" OD ±.001" ±.001"
1/8" OD ±.003" ±.003"
3/16" OD ±.004" ±.004"
5/16" OD ±.004" ±.004"
1mmOD ±.025mm ±.025mm
2mmOD ±.075mm ±.075mm
3mmOD ±.075mm ±.075mm
4mmOD ±.1 mm ±.10mm
These tolerances guarantee a good connection and ensure lot-to-lot dimensional consistency.
Please Note: Upchurch Scientific is a Teflon brand licensee. Our FEP tubing is made exclusively of genuine DuPont® Teflon FEP to ensure consistent, high quality product.

Mindestabnahmemenge beachten !

Artikelnummer Tubing ID Color Max. Pressure Preis in € / VE (3 m)
TEFLON FEP TUBING, 1/16" OD
1474 .004" (100µm) ID x 10' Black 4,000 psi (276 bar) (1) 50,37
1475 .005" (125µm) ID x 10' Red 4,000 psi (276 bar) (1) 50,37
1476 .006" (150µm) ID x 10' Violet 4,000 psi (276 bar) (1) 50,37
1477 .007" (175µm) ID x 10' Yellow 4,000 psi (276 bar) (1) 50,37
1478 .008" (200µm) ID x 10' Natural 4,000 psi (276 bar) (1) 50,37
1479 .009" (230µm) ID x 10' Blue 4,000 psi (276 bar) (1) 50,37
1526 .010" (0.25mm) ID x 10' Natural 3,000 psi (207) (1) 23,48
1526B .010" (0.25mm) ID x 10' Blue 3,000 psi (207) (1) 23,48
1549 .020" (0.50mm) ID x 10' Natural 2,000 psi (138 bar) (1) 19,57
1549OR .020" (0.50mm) ID x 10' Orange 2,000 psi (138 bar) (1) 19,57
1518 .020" (0.50mm) ID x 10' Black 2,000 psi (138 bar) (1) 19,57
1522 .030" (0.75mm) ID x 10' Natural 1,000 psi (69 bar) (1) 19,57
1522G .030" (0.75mm) ID x 10' Green 1,000 psi (69 bar) (1) 19,57
TEFLON FEP TUBING, 1/8" OD
1523 .062" (1.55mm) ID x 10' Natural 500 psi (34 bar) (1) 30,69
1521BL .062" (1.55mm) ID x 50' Blue 500 psi (34 bar) (1) 153,47 (15 m)
1521GL .062" (1.55mm) ID x 50' Green 500 psi (34 bar) (1) 153,47 (15 m)
1521ORL .062" (1.55mm) ID x 50' Orange 500 psi (34 bar) (1) 153,47 (15 m)
1521RL .062" (1.55mm) ID x 50' Red 500 psi (34 bar) (1) 153,47 (15 m)
1521YL .062" (1.55mm) ID x 50' Yellow 500 psi (34 bar) (1) 153,47 (15 m)
TEFLON FEP TUBING, 3/16" OD
1525 .125" (3.20mm) ID x 10' Natural 500 psi (34 bar) (1) 37,29
TEFLON FEP TUBING, 1/4" OD
1651 .156" (4.0mm) ID x 10' Natural 250 psi (17 bar) (1) 57,99
1650 .188" (4.80mm) ID x 10' Natural 250 psi (17 bar) (1) 57,99
TEFLON FEP TUBING, 5/16" OD
1652 .250" (6.35mm) ID x 10' Natural 250 psi (17 bar) (1) 60,98
TEFLON FEP TUBING, 1mm OD
        Preis in €/VE (3; 15; 30m)
1671 0.5mm (.020") ID x 3m Natural 500 psi (34 bar) (1) 30,69
1671L 0.5mm (.020") ID x 15m Natural 500 psi (34 bar) (1) 153,47
1671XL 0.5mm (.020") ID x 30m Natural 500 psi (34 bar) (1) 261,00
TEFLON FEP TUBING, 2mm OD
1673 1mm (.040") ID x 3m Natural 500 psi (34 bar) (1) 30,69
1673L 1mm (.040") ID x 15m Natural 500 psi (34 bar) (1) 153,47
1673XL 1mm (.040") ID x 30m Natural 500 psi (34 bar) (1) 261,00
TEFLON FEP TUBING, 3mm OD
1675 1mm (.040") ID x 3m Natural 500 psi (34 bar) (1) 30,69
1675L 1mm (.040") ID x 15m Natural 500 psi (34 bar) (1) 153,47
1675XL 1 mm (.040") ID x 30m Natural 500 psi (34 bar) (1) 261,00
1677 2mm (.080") ID x 3m Natural 500 psi (34 bar) (1) 30,69
1677L 2mm (.080") ID x 15m Natural 500 psi (34 bar) (1) 153,47
1677XL 2mm (.080") ID x 30m Natural 500 psi (34 bar) (1) 261,00
TEFLON FEP TUBING, 4mm OD
1679 3mm (.120") ID x 3m Natural 500 psi (34 bar) (1) 37,29
1679L 3mm (.120") ID x 15m Natural 500 psi (34 bar) (1) 186,43
1679XL 3mm (.120") ID x 30m Natural 500 psi (34 bar) (1) 316,52
(1) Testing conducted with water at room temperature. Use of some chemicals and at higher temperatures may reduce the pressure limit. Please contact us for more information

 

TEFLON® PFA TUBING
- 1/16" and 1/8" ODs Available / Excellent Solvent Resistance and Low Gas Permeability
Upchurch Scientific® Teflon PFA (perfluoro alkoxy alkane) tubing offers excellent solvent resistance (virtually identical to FEP and PTFE Teflon) while adding several advantages. These include smoother surface texture, higher continuous service temperature and superior polymer purity. The recommended maximum operating temperature for our Teflon PFA tubing is 80°C. The OD/ID tolerances of our 1/16" OD PFA tubing are ±.001 " for both, while our 1/8" OD PFA tubing tolerances are ±.003" for both OD and ID.

 

POLYMER TUBING GAS PERMEABILITY
(Permeability is listed as cm3/1002 in-24 h•atm/mil @ 25°C)
Halar® ECTFE polymer Teflon® PFA fluorpolymer
Carbon Dioxide 330 Carbon Dioxide 2,260
Nitrogen 10 Nitrogen 291
Oxygen 25 Oxygen 881
PEEK™ polymer Tefzel® fluorpolymer
Oxygen 14 Carbon Dioxide 250
Radel® R polymer Nitrogen 30
Carbon Dioxide 830 Oxygen 100
Nitrogen 36 Ultem® PEI polymer
Oxygen 195 Oxygen 37
Teflon® FEP fluoropolymer  
Carbon Dioxide 1,670
Hydrogen 2,200
Nitrogen 323
Oxygen 748

 

 
TUBING INTERNAL DIAMETERS AND VOLUMES
Tubing Internal Diameter (d) in inches to Linear Volume (µL/inch): 12870.4 (d hoch2)      
Tubing Internal Diameter (d) in µm to Linear Volume (µL/cm): 7.85 x 10 hoch -6 (d hoch2)
Internal Diameters Linear Volumes
Inches Wire Gauge (1) millimeters Microns µL/in µL/cm
0.0008 - 0.020 20 0.008 0.003
0.001 - 0.025 25 0.013 0.005
0.002 - 0.051 51 0.051 0,020
0.0025 - 0.064 64 0.081 0.032
0.003 - 0.076 76 0.116 0.046
0.004 36 0.102 102 0.206 0.081
0.005 35 0.127 127 0.322 0.127
0.006 - 0.152 152 0.463 0.182
0.007 34 0.178 178 0.631 0.248
0.008 33 0.203 203 0.824 0.324
0.009 32 0.229 229 1.042 0,410
0.010 31 0.254 254 1.287 0.507
0.012 30 0.305 305 1.853 0.730
0.014 28 0.356 356 2.523 0.993
0.015 - 0.381 381 2.896 1,140
0.018 26 0.457 457 4.170 1.642
0.020 25 0.508 508 5.148 2.027
0.028 22 0.711 711 10.090 3.973
0.030 - 0.762 762 11.583 4.560
0.032 21 0.813 813 13.179 5.189
0.040 - 1.016 1016 20.593 8.107
0.042 19 1.067 1067 22.703 8.938
0.046 - 1.168 1168 27.234 10.722
0.055 - 1.397 1397 38.933 15.328
0.062 - 1.575 1575 49.474 19.478
0.080 14 2.032 2032 82,370 32.429
0.093 - 2.362 2362 111.316 43.825
0.120 9 3.048 3048 185.333 72,966
0.125 - 3.175 3175 201.099 79.173
(1) Wire Gauge numbers are referencing Birmingham or Stub's Iron Wire Gauge values, which are commonly used by most stainless steel syringe manufacturers.

Mindestabnahmemenge beachten !

Artikelnummer Tubing ID Color Max. Pressure (1) Preis in € / VE (1,5 m)
TEFLON PFA TUBING, 1/16" OD
1500 .020" (0.50mm) ID x 5' Natural 2,000 psi (138 bar) 11,12
1502 .030" (0.75mm) ID x 5' Natural 1,000 psi (69 bar) 11,12
1503 .040" (1.00mm) ID x 5' Natural 500 psi (34 bar) 11,12
TEFLON PFA TUBING, 1/8" OD
1508 .062" (1.55mm) ID x 10' Natural 500 psi (34 bar) 38,42 (3 m)
(1) Testing conducted with water at room temperature. Use of some chemicals and at higher temperatures may reduce the pressure limit. Please contact us for more information.

 

HIGH PURITY TEFLON® PFA TUBING 

- 1/16",1/ß", 3/16" and 1/4" ODs Available / PFA HP and PFA HP Plus Grades Available / Virtually Contaminant Free
Upchurch Scientific® PFA High Purity (HP) tubing offers all of the benefits of standard Teflon PFA tubing and more! This tubing is manufactured from a premium grade of PFA that is one of the most contaminant-free polymers available. Designed for chemical environments where purity in the parts-perbillion is needed, this tubing is perfect for fluid handling systems in the medical, diagnotistics, pharmaceutical, biotechnology and semiconductor industries. PFA HP Plus tubing is available in 1/16" and 1/8" OD sizes. This polymer grade has the same unsurpassed purity of Teflon PFA HP, with increased ability to withstand repeated flexing and improved resistance to stress cracking when exposed to aggressive fluorosurfactants. It also offers a more chemicallystable polymer chain end-capping functional group, minimizing interaction of this polymerwith ionic species. Furthermore, tubing made from PFA HP Plus offers even smoother, clearer walls than the standard PFA HP. The tolerances of our 1/16" OD PFA HP and PFA HP Plus are ±.001 ", and ±.003"for the 1/8" OD tubing of both grades. Tolerances for 3/16" OD PFA HIP tubing are ±.003" as well, with 1/4" OD PFA HP tubing tolerances at ±.004". Please Note: all tolerance values apply to both OD and ID.
360µm OD TEFLON TUBING

Our capillary-sized tubing is manufactured from Teflon PFA HP Plus polymer. This tubing offers excellent chemical compatibility, transparency, very low contaminant levels and is available in the most commonly-used outer diameter for capillary tubing applications. Inner diameters range from 50µm to 150µm and tolerances are an incredible ±.0005" on both the ID and the OD.
To cut this tubing to the length you need, we highly recommend our A-350 Polymer Tubing Cutter.  Please Note: once this tubing is held in place by connecting fittings, extra care must be taken not to stretch the tubing, as this will likely cause dimensional changes in both the OD and the ID of the tubing.

Mindestabnahmemenge beachten !

Artikelnummer Tubing ID Color Max. Pressure (1) Preis in €/VE (1,5 m; 3m)
TEFLON PFA HP TUBING, 1/16" OD
1620 .020" (0.50mm) ID x 5' Natural 2,000 psi (138 bar) 14,01 (1,5m)
1630 .030" (0.75mm) ID x 5' Natural 1,000 psi (69 bar) 14,01 (1,5m)
TEFLON PFA HP TUBING, 1/8" OD
1640 .062" (1.55mm) ID x 10' Natural 500 psi (34 bar) 44,19 (3 m)
TEFLON PFA HP TUBING, 3716" OD
1642 .125" (3.20mm) ID x 10' Natural 250 psi (17 bar) 48,93 (3 m)
TEFLON PFA HP TUBING, 1/4" OD
1645 .188" (4.80mm) ID x 10' Natural 250 psi (17 bar) 62,01 (3 m)
TEFLON PFA HP PLUS TUBING, 1/16" OD
1900 .010" (0.25mm) ID x 5' Natural 3,000n psi (207 bar) 16,79 (1,5 m)
1905 .020" (0.50mm) ID x 5' Natural 2,000 psi (138 bar) 16,79 (1,5 m)
1910 .030" (0.75mm) ID x 5' Natural 1,000 psi (69 bar) 16,79 (1,5 m)
TEFLON PFA HP PLUS TUBING, 1/8" OD
1920 .062" (1.55mm) ID x 10' Natural 500 psi (34 bar) 53,05 (3 m)
TEFLON PFA HP PLUS TUBING, 360µm OD
1930 50µm (.002") ID x 5' Natural 3,500 psi (241 bar) 26,16 (1,5 m)
1931 75µm (.003") ID x 5' Natural 3,000 psi (207 bar) 26,16 (1,5 m)
1932 100µm (.004") ID x 5' Natural 2,500 psi (172 bar) 26,16 (1,5 m)
1933 150µm (.006") ID x 5' Natural 1,750 psi (121 bar) 26,16 (1,5 m)
(1) Testing conducted with water at room temperature Use of some chemicals and at higher temperatures may reduce the pressure limit Please contact us for more information

 

STAINLESS STEEL TUBING
- Precut 316 Stainless Steel (1) /
The Cleanest, Best Finish Available / Color-Coded Banding for Easy Identification

 (1) Except our.020 OD Stainless Steel Tubing, which is manufactured from 304 series stainless steel. (2)Except the ,004 ID size, which has an ID tolerance o1+,002 /-.000"
Upchurch Scientific provides seamless, precut stainless steel tubing to meet the exacting requirements of today's analyses. We machine cut and polish each end, deburr the inside and outside edges and passivate the tubing. Finally, we flush reagent-grade methanol through each piece.
Our thorough preparation and cleaning procedure guarantees tubing that is truly ready-to-use, with flat, burr-free ends and a very clean finish. This care is important in achieving zero-dead-volume connections and good chromatographic results. We offer a variety of precut lengths as well as longer lengths (5' and 25') of some sizes. Cutting the tubing disturbs and roughens the tubing's end surface, so we recommend using our precut tubing whenever possible. If you need to cut tubing to custom lengths, we suggest you then passivate the tubing.
The tolerances of our .020" (510µm) OD tubing are ±.0005" for both OD and ID. Tolerances for our 1/32" OD tubing are +.002"/-.000" for the OD and +.000"/-.002" for the ID.(2) For 1/16" OD tubing, the tolerances are +.002"/.000" for the OD and ±.001 " for the ID. Our 1/8" OD tubing tolerances are ±.003 for both OD and ID.
Stahl Kapillare

 

MISCELLANEOUS STAINLESS STEEL TUBING SPECIFICATIONS
-  Maximum Recommended Operating Temperature: 750ºF (399ºC)  / Rockwell Hardness (B): Maximum of 95 / Meets ASTM A269 and A213

STAINLESS STEEL TUBING PASSIVATION
Stainless steel is naturally self-passivating, forming an oxidation layer on newly created surfaces. Upchurch Scientific takes extra steps to ensure the chemical resistance of our stainless steel tubing by manually passivating before and after the tubing is cut into specified lengths (except in a few cases where size is prohibitive). In the pre-cut
stage, the internal wall is acid passivated and flushed. After the tubing is cut, deburred and polished, the length is completely submerged in an acid passivation bath and again flushed clean. The table below summarizes the manual passivation steps performed for each size of our stainless steel tubing:
Tubing Precut Passivation Postcut Passivation
.020" OD All All
1/32" OD All All
1/16" OD All All, ex. 25`lenghts
1/8" OD None All, ex. 3&5m lenghts

 

THE BEAUTY OF PRECUT TUBING

Precut Tubing

Tubing cut by a commercially available tubing cutter

File Cut tubing
Artikelnummer Lenght Preis in € Artikelnummer Lenght Preis in €
STAINLESS STEEL (1), .005" (125µm) ID X .020" (510µm) OD STAINLESS STEEL, .004" (100µm) ID X 1/32" (785µm) OD (Red Color Band)
U-119 5cm 5,30 U-1114 5cm 4,30
U-120 10cm  5,90 U-1115 10cm  5,70
U-121 20cm  8,00 U-1116 20cm  8,80
U-122 30cm  11,20 U-1117 30cm  11,90
U-123 50cm  19,50      
U-124 1m(2) 36,20      
U-125 5´(2)  48,30      
STAINLESS STEEL, .006" (150µm) ID X 1/32" (785µm) OD (Yellow Color Band) STAINLESS STEEL, .008" (200µm) ID X 1/32" (785µm) OD (Clear Color Band)
U-1120 5cm 4,30 U-1125 5cm 4,20
U-1121 10cm  5,70 U-1126 10cm 5,70
U-1122 20cm  8,80 U-1127 20cm  8,80
U-1123 30cm  11,90 U-1128 30cm  11,90
STAINLESS STEEL, .010" (.25mm) ID X 1/32" (785µm) OD (Blue Color Band) STAINLESS STEEL, .012" (0.30mm) ID X 1/32" (785µm) OD (White Color Band)
U-1130 5cm 4,30 U-1135 5cm 4,30
U-1131 10cm  5,70 U-1136 10cm 5,70
U-1132 20cm  8,80 U-1137 20cm  8,80
U-1133 30cm  11,90 U-1138 30cm  11,90
STAINLESS STEEL, .015" (0.40mm) ID X 1/32" (785µm) OD (Green Color Band) STAINLESS STEEL, .018" (0.45mm) ID X 1/32" (785µm) OD (Black Color Band)
U-1140 5cm 4,30 U-1145 5cm 4,30
U-1141 10cm  5,70 U-1146 10cm  5,70
U-1142 20cm  8,80 U-1147 20cm  8,80
U-1143 30cm  11,90 U-1148 30cm  11,90
STAINLESS STEEL, .005" (125µm) ID X 1/16" OD (Red Color Band) STAINLESS STEEL, .007" (175µm) ID X 1/16" OD (Black Color Band)
U-152 5cm 3,90 U-126 5cm 3,80
U-153 10cm 5,20 U-127 10cm 4,90
U-154 20cm 7,60 U-128 20cm 7,00
U-155 30cm 10,00 U-129 30cm 9,10
U-156 0.5m 15,00 U-130 0.5m 13,40
U-157 1m (2) 27,20 U-131 1m (2) 24,10
U-158 5` (2) 40,00 U-108 5` (2) 35,30
U-160 25`(2) 188,90 U-161 25` (2) 165,70
STAINLESS STEEL, .010" (0.25mm) ID X 1/16" OD (Blue Color Band) STAINLESS STEEL, .020" (0.50mm) ID X 1/16" OD (Yellow Color Band)
U-111 5cm 3,80 U-101 5cm 3,60
U-112 10cm 4,90 U-102 10cm 4,50
U-113 20cm 7,00 U-103 20cm 6,40
U-114 30cm 9,10 U-104 30cm 8,30
U-132 0.5m 13,40 U-134 0.5m 11,90
U-133 1m (2) 24,10 U-135 1m (2) 21,00
U-106 5` (2) 35,30 U-105 5` (2) 30,70
U-162 25` (2) 165,70 U-163 25` (2) 142,40
STAINLESS STEEL, .030" (0.75mm) ID X 1/16" OD (White Color Band) STAINLESS STEEL, .040" (1.0mm) ID X 1/16" OD
U-115 5cm 3,80 U-138 5cm 5,50
U-116 10cm 4,90 U-139 10cm 8,30
U-117 20cm 7,00 U-140 20cm 13,70
U-118 30cm 9,10 U-141 30cm 19,20
U-136 0.5m 13,40 U-142 0.5m 30,30
U-137 1m (2) 24,10 U-143 1m (2) 57,70
U-107 5` (2) 35,30 U-144 5` (2) 86,50
U-164 25` (2) 165,70 U-165 25` (2) 296,00
STAINLESS STEEL, .046" (1.15mm) ID X 1/16" OD STAINLESS STEEL, .080" (2.0mm) ID X 1/8" OD
U-145 5cm 5,70 U-815 15cm 9,10
U-146 10cm 8,80 U-825 25cm 13,40
U-147 20cm 15,00 U-800 1m (2) 45,40
U-148 30cm 21,00 U-803 3m (2) 131,00
U-149 0.5m 33,20 U-805 5m (2) 216,50
U-150 1m (2) 63,80
U-151 5` (2) 95,50
(1) Our 020 OD tubing is made of 304 series stainless steel All other tubing on this page is made o1316 series stainless steel. (2) All Stainless Steel tubing longer than 1 m is coiled

 

PRECUT STAINLESS STEEL TUBING KITS

TITANIUM TUBING
- Excellent Alternative to Stainless Steel Biocompatible
Try Upchurch Scientific® pre-cut Stainless Steel Tubing Kits, which contain some of the most popular 1/16" OD tubing sizes at a discount compared to purchasing the pieces individually. Each kit includes a handy storage container, great for keeping your tubing organized and close at hand.
Our 316 stainless steel tubing meets the highest quality standards in the industry. Each tubing piece features polished, burr-free ends and includes a color-coded band for easy ID identification.		 Metal tubing is necessary in certain high pressure or high temperature applications, but stainless steel cannot be used in some cases (such as with protein analysis). Titanium is an excellent biocompatible alternative.
Upchurch Scientific's commercially-pure, seamless titanium tubing is carefully cut to ensure a square, burr-free end. The tolerances of our titanium tubing are: +.002" and -.000" for the OD, and ±.001" for the ID.
Please be aware of the drawbacks of titanium tubing. It is brittle, so care must be taken when bending. Also, acids can cause physical stress and potential fracturing along the wall of the tubing.
vorgeschnittene Stahlkapillare

 

1320 PRE-CUT STAINLESS STEEL TUBING KIT
Enthält Preis in €
 10 Stck.U-101; 10 Stck. U-102; 5 Stck. U-103; 10 Stck. U-111; 10 Stck. U-112 und 5 Stck. U-113 204,90
PRE-CUT STAINLESS STEEL TUBING KITS

1321

 (10).010"IDx1/16"OD5cm & (10).010"IDx1/16"OD10cm 82,71
1322 (10).007"ID x 1/16"OD 5cm & (10).007"ID x 1/16"OD 10cm 82,71
1323 (10).005"IDx 1/16"OD5cm &  (10).005"IDx1/16"OD10cm 87,14
1324 (10).020"IDx 1/16"OD5cm & (10).020"IDx1/16"OD10cm 77,76
TITANIUM TUBING, 1/16" OD
U-170 .070" (0.25mm) ID x 5cm 10,61
U-171 .010" (0.25mm) ID x 10cm 18,23
U-172 .010" (0.25mm) ID x 20cm 33,68
U-173 .070" (0.25mm) ID x 30cm 49,13
U-177 .010" (0.25mm) ID x 60cm 95,28
U-175 .030" (0.75mm) ID x 20cm 40,17
U-176 .030" (0.75mm) ID x 30cm 58,92
U-178 .030" (0.75mm) ID x 60cm 114,85

 

CAPILLARY POLYMER TUBING CUTTER

 Kunststoff Kapillarschneider
The Upchurch Scientific® A-350 Cutter is designed to cut capillary-sized polymertubing. The cutter makes clean, perpendicular cuts without collapsing thin capillary walls. A set of ten tubing sleeves, required for cutting, are included with each cutter, along with five replacement blades. The included tubing sleeves are for cutting 360µm OD polymer capillary tubing. Alternative sleeves are available for cutting 510µm and 1/32" OD tubing. All tubing sleeves are 2" long and are made of FEP Teflon®.
Kunststoff Kapillarschneider

POLYMER TUBING CUTTERS
- For 1/16", 1/8", 3/16", 1/4" and 5/16" OD tubing
A flat, 90º, burr-free cut is difficult to obtain with most commercial polymer tubing cutters. Upchurch Scientific has designed several tubing cutters specifically to cut polymer tubing. This line of tubing cutters includes a standard cutter for 1/16" and 1/8" OD tubing (A-327), and another for large bore tubing (A-329). Each has guide holes to ensure precise cutting. These cutters are durable, reliable, and easy to operate. Five replacement blades are included with each cutter.

FUSED SILICA TUBING CUTTERS
We offer a precision cutter for fused silica tubing - SGT's Shortix™ Cutter (FS-315). This cutter ensures clean, trouble-free cutting of fused silica tubing, providing better cuts than any other product on the market. It also includes a built-in magnifying glass to examine the cut tubing ends. Order the FS-315-02 Maintenance Kit, as needed, to replace a worn or damaged cutting wheel.
When using traditional fused silica tubing cutters, only a small part of the tubing wall is scratched, then the tubing is snapped in two, often resulting in ajagged, uneven cut. With a Shortix Cutter, a clean cut is made every time, regardless of skill or experience, as the cut is made by rotating a diamond blade around the entire circumference of the tubing.
We now also carry the Shortix Plus Cutter for fused silica tubing (FS-400). Built into the base of a genuine Swiss Army®" knife, the Shortix Plus includes a Shortix fused silica tubing cutter with built-in magnifying glass, ferrule remover, septum hook and round file, plus standard Swiss Army knife features, such as: a knife blade, screw drivers, multipurpose wrench, awl, scissors, tweezers, can opener, nail file, and toothpick. This cutter also comes with a nylon belt loop carrying case.
Please Note: the FS-315 and FS-400 Fused Silica Tubing Cutters are designed to cut only tubing with ODs of 350µm - 780µm and IDs of 100µm - 350µm

 

Artikelnummer Beschreibung Menge Preis in €

CAPILLARY POLYMER TUBING CUTTER
A-350 Capillary Polymer Tubing Cutter (1) for 360µm - 1/32" OD tubing  Includes (1) F-262x 10-pack of sleeves and (1) M-438-03 wrench   124,01
A-351  Replacement Blades for A-350 5-pk 8,20
F-262x Replacement Sleeves for A-350,.0155" ID, Green, for cutting 360µm OD tubing 10-pk 24,72
F-264x Alternative Sleeves for A-350,,02 1" ID, Natural, for cutting 510µm OD tubing 10-pk 24,72
F-267Bx Alternative Sleeves for A-350-033" ID, Blue,  for cutting 1/32" OD tubing 10-pk 24,72
FUSED SILICIA TUBING CUTTERS
FS-315 Shortix Precision Fused Silica Tubing Cutter   407,47
FS-315-02 Maintenance Kit for FS-315   198,99
FS-400  Shortix Plus Fused Silica Tubing Cutter   464,32
FS-400-02 Maintenance Kit for FS-400   236,90
POLYMER TUBING CUTTERS
A-327 Standard Polymer Tubing Cutter (2) for 1/ 16" and 1/8" OD tubing   23,07
A-329 Large Bore Polymer Tubing Cutter (2) for 3/16" - 5/16" OD tubing   23,07
A-328 Replacement Blades for A-327 and A-329    5-pk 7,42
 (1) Includes (1) A-351 5-pack of replacement blades (2) Includes (1) A-328 5-pack of replacement blades