High-Pressure In-Line Filter aus Stahl

The VICI Jour SS In-Line Filter P/N 68230 is intended for use between injector and column. With minimal void volume (0.25 mm bore) and a frit porosity of 0.5, 2 or 5 µm this in-line filter will protect your valuable column.

Use the In-Line filter P/N 68231 for higher flow rates. The 0.75 mm bore and a 0.5, 2 or 5 µm porosity frit will allow you to filter i.e. particulates between pump and injector.

SS High-Pressure In-Line Filter
Part No.	Drawing
68230-05	Filter, SS, In-Line, 0.25 mm bore, 10-32, SS 0.5 µm
68230-2	Filter, SS, In-Line, 0.25 mm bore, 10-32, SS 2 µm
68230-5	Filter, SS, In-Line, 0.25 mm bore, 10-32, SS 5 µm

68231-0.5	Filter, SS, In-Line, 0.75 mm bore, 10-32, SS 0.5 µm
68231-2	Filter, SS, In-Line, 0.75 mm bore, 10-32, SS 2 µm
68231-5	Filter, SS, In-Line, 0.75 mm bore, 10-32, SS 5 µm

Spare parts:
1110-0.5P	Frit, SS, PEEK-encased 0.5 µm, for P/N 68230 series
1110-2P	Frit, SS, PEEK-encased 2 µm, for P/N 68230 series
1110-5P	Frit, SS, PEEK-encased 5 µm, for P/N 68230 series

1111-0.5P	Frit, SS, PEEK-encased 0.5 µm, for P/N 68231 series
1111-2P	Frit, SS, PEEK-encased 2 µm, for P/N 68231 series
1111-5P	Frit, SS, PEEK-encased 5 µm, for P/N 68231 series

SPECS:
Material:	SS316
Dimensions:	See illustration
Tolerances:	+/- 0.05 mm (.002")
Pressure rating:	< 420 bar (< 6000 psi)
Filter Dimensions:	P/N 1110-x Ring OD 3.00 mm Frit OD 0.97 mm P/N 1111-x Ring OD 3.00 mm Frit OD 1.96 mm