Niederdruck T- und Kreuz Stücke

 

PEEK Tees & Crosses Low Pressure

VICI Jour Tees and Crosses for low-pressure applications are machined from PEEK. The Tees and Crosses have 1/4"-28 female ports which accept any flanged or flangeless fitting for 1/8" or 1/16" OD tubing. Choose 0.80 mm thru-holes for applications where low flow rate or low dead volume is required. Tees and Crosses with 1.50 mm thru-holes are preferred for high-flow rate applications. VICI Jour Low-Pressure Tees and Crosses are available with or without Delrin flangeless fittings.
PEEK Tees & Crosses
Part No. Description
6030 Tee, PEEK, LP bore 0.8 mm, complete, 1/4"-28
6031 Tee, PEEK, LP bore 1.5 mm, complete, 1/4"-28
6040 Cross, PEEK, LP bore 0.8 mm, complete, 1/4"-28
6041 Cross, PEEK, LP bore 1.5 mm, complete, 1/4"-28
6032 Tee, PEEK, LP bore 0.8 mm, body only
6033 Tee, PEEK, LP bore 1.5 mm, body only
6042 Cross, PEEK, LP bore 0.8 mm, body only
6043 Cross, PEEK, LP bore 1.5 mm, body only
050 Black Nut, Delrin, flangeless 1/8”, black, 1/4"-28 051 Ferrule, Tefzel, 1/8"
040 Black Nut, Delrin, flangeless 1/16”, black, 1/4"-28
041 Ferrule, Tefzel, 1/16"

 
 SPECS:
 Material: Tee and Cross body = PEEK
Fitting = Delrin
Ferrule = Tefzel
 Dimensions: Flangeless fittings for OD 1/8" Tubing are supplied with Tees and Crosses with 1.50 mm thru-holes.
Flangeless Fittings for OD 1/16" Tubing are supplied with Tees and Crosses with 0.80 mm thru-holes.
 Tolerances: +/- 0.05 mm (.002")
 Pressure rating: < 70 bar (< 1000 psi)
 Special Info: Two Thru-hole Sizes to Handle High or Low Flow Rates